Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel
bgColor#fff
  1. Run the following command to check if the system is connected to the domain:
    1. #smbadm list
      1. If it displays [WORKGROUP], then it is not connected
    2. Now run #adutil check <domain name>
      1. If you receive the following error:
        1. FAIL       domain                 Results: Local domain does not match target domainT
          1. Take note of the IP addresses associated with “adservers”
          2.  #vi /etc/resolv.conf
          3. (Please review instructions for navigating using the vi text editor. Other editing programs may be used, also.)
          4. Verify or correct the “domain” field to match your expected domain name
  2. Run this command to save settings: #bsradm dns save
  3. Note the systems hostname, #hostname
  4. On a Windows machine, open up the “Remote Desktop Connection” app
    1. Input the previously recorded IP address of the AD server
  5. Use the Server Manager app to navigate to the domain
    1. Action -> Find -> Find Computers (select from dropdown)
    2. Search for the Brickstor by hostname (use all caps)
    3. Right click on the hostname and select “delete”
    4. Exit Server Manager
  6. To add the Brickstor to the domain, use the following command:
    # smbadm join -y -u Administrator <domain name>
      1. Note: This will require domain admin privileges
      2. Note: If step smbadm join fails, ensure that all critical services such as NTP are online. You can check this via the GUI or #svcs. To restart a service, use #svcadm restart <service>. If a service is in maintenance mode, this can be cleared using #svcadm clear <service> then #svcadm enable <service>. 

...