Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

If you need to find out the Current IP of the Remote Management (RMM) Port of your BrickStor so that you can manage the appliance out of band use one of the following methods.

From The myRack Manager (GUI)

Click on the BrickStor Appliance in the Left Navigation Pane


  1. Login to the appliance
  2. If the GUI is unable to connect but has connected to this BrickStor appliance in the past it will automatically give you the option in the failure message to Open RMM Console which will lauch an web browser with the proper IP.
  3. If you are connected to the appliance you can view the RMM by clicking the RMM console under the Hardware Section of the GUI

From the Command Line (CLI)


# bsradm hw rmm

IpSource: DHCP Address
MacAddress: 00:1e:67:a0:57:db
SnmpCommunityString: public
Vlan: 0

In this case the IP of the RMM is

From the BIOS

  1. Power on or Reboot the Appliance
  2. Pres F2 to enter the BIOS Setup


There is no content with the specified labels

  • No labels