Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

If you need to find out the Current IP of the Remote Management (RMM) Port of your BrickStor so that you can manage the appliance out of band use one of the following methods.

From The myRack Manager (GUI)

Click on the BrickStor Appliance in the Left Navigation Pane

 

  1. Login to the appliance
  2. If the GUI is unable to connect but has connected to this BrickStor appliance in the past it will automatically give you the option in the failure message to Open RMM Console which will lauch an web browser with the proper IP.
  3. If you are connected to the appliance you can view the RMM by clicking the RMM console under the Hardware Section of the GUI

From the Command Line (CLI)

# bsradm hw rmm
IpSource: DHCP Address
IpAddress: 10.1.12.129
SubnetMask: 255.255.255.0
MacAddress: 00:1e:67:a0:57:db
SnmpCommunityString: public
DefaultGateway: 10.1.12.254
Vlan: 0

In this case the IP of the RMM is 10.1.12.129

From the BIOS

  1. See this article: https://kb.racktopsystems.com/x/qgAX

 

There is no content with the specified labels

  • No labels